HDG-2000 HDTV Calibration Generator Specifications

Picture Format

1080i

SMPTE 274M

1920 x 1080 Pixels - Interlaced Active Picture Area

2200 x 1125 Pixels - Interlaced Total Frame

74.17582 (74.25/1.001) MHz Pixel Clock Rate*

59.94 Hz (60/1.001) Field Rate, 29.97 Hz (30/1.001) Frame Rate*

720p

SMPTE 296M

1280 x 720 Pixels Progressive Active Picture Area

1650 x 750 Pixels - Progressive Total Frame

74.17582 (74.25/1.001) MHz Pixel Clock Rate*

59.94 Hz (60/1.001) Frame Rate*

* 74.17582 (74.25/1.001) MHz, 59.94 Hz (60/1.001) is US standard,

74.25 MHz, 60 Hz available by special order

Output Format (All signals into 75 ohm loads, all signals include 75 ohm reverse termination)

SMPTE 274M/296M

YPbPr

Y - 700 mV

Pb/Pr - ±350 mV

RGB

700 mV

Consumer Upconverters w/Setup

YPbPrs

Y - 700 mV peak, with 7.5 IRE (52.5 mV) Setup

Pb/Pr - ±324 mV

RGBs

700 mV peak, with 7.5 IRE (52.5 mV) Setup

Sync Format (All signals into 75 ohm loads, all signals include 75 ohm reverse termination)

YPbPr, YPbPrs

Bi-Level or Tri-Level Sync with HV-, HV+, or No HV Sync

RGB, RGBs

Bi-Level, Tri-Level , or No Signal Sync with HV-, HV+, or No HV Sync

Tri-Level Sync

SMPTE 274M/296M

±300 mV on all RGB & YPbPr signals

Bi-Level Sync

-300 mV on Y or G signals only

HV+ Sync

0 to +4 V ( 0 to +2.7V with both BNC and VGA outputs loaded)

HV- Sync

+4 to 0 V (+2.7 to 0 V with both BNC and VGA outputs loaded)

Calibration Patterns (48 Patterns)

Color 75 (8)

75 IRE Color Bars & 75 IRE Tri-Split Bars

75 IRE Red/Green/Blue/Cyan/Magenta/Yellow Windows

Color 100 (8)

100 IRE Color Bars & 100 IRE Tri-Split Bars

100 IRE Red/Green/Blue/Cyan/Magenta/Yellow Fields

Special (8)

16:9 Crosshatch, 16:9 Inverse Crosshatch, Dual Needle Pulse, Luma Multi-burst,
Color Multi-burst, Sharpness, 4:3 Display Sizing, Checkerboard

PLUGE (8)

±4 IRE PLUGE with 0%, 25%, 50% Average Picture Level Background

20, 30, 70, 80, 25/100 IRE Windows with ±4 IRE PLUGE

Gray Scale (8)

0-100 IRE 10-step Horizontal Linearity

0-100 IRE 10-step Vertical Linearity

0-100 IRE 10 step Split Vertical Linearity

25, 50, 75, 100 IRE Windows with ±4 IRE PLUGE

100 IRE Window with ±4 IRE, 96/100 IRE PLUGE

Gray Field (8)

H/V % Overscan, Inverse H/V % Overscan, Bounce H/V % Overscan
0, 25, 50, 75, 100 IRE Gray Fields

Output Connectors (Both simultaneously active)

Display

Five 75-ohm BNCs - R/Pr, G/Y, B/Pb, H/C sync, V sync

Monitor

One 15-pin sub-D (VGA) connector - R/Pr, G/Y, B/Pb, H/C sync, V sync

Other

Power

90-130 VAC, 47-63 Hz less than 5 watts

Control

Remote 3-wire Interface

Size

6.5" (W) x 1.75" (H) x 4.5" (D)

Weight

Approximately 2 lbs